LED Analyser

 

 

 

 

 

 

 

 

 

 

 

 

Feasa's LED Life Tester offers accelerated testing and monitoring of LEDs from -65°C to +125°C.
The Fiber used in the tester has been specially selected and prepared for use in temperatures of -65°C to +125°C. The Feasa Optical Heads have been designed from selected materials to withstand extreme temperatures. The Tester sits outside the oven and the LEDs are monitored continuously during the Life Time Test.

 

Available Interfaces

USB offers a very simple interface to the LED Analyser with no requirement for an additional power supply. Very high baud rates, up to 460800 baud, are available.
The RS232 Serial Port is easy to use with a max baud rate of 115200. It requires the use of an external power supply.

Daisy Chain

Multiple LED Analysers can be connected together using the Daisy Chain Connectors. Only one RS232 Serial Port or USB Port is required to connect up to 30 LED Analysers.

Test Software

The Test Software has the ability to continuously test LEDs at fixed time intervals. Between 1 second and multiple hours data can be saved to disk for later retrival, reporting and graphing of results.
The Test Software can be configured to send an email on error and also at the end of a test sequence.